Описание
- levelling of floor screeds before bonding with STAUF wood flooring adhesives and adhesives for textile and elastic floorings
Application range
- sanded mastic asphalt screed
- concrete C 25 / 30 according to DIN 1045 (non-skid surface)
- calcium sulphate (flow) floors
- wooden planks, wood fibre boards
- magnesite and plaster floors
- chipboards V100 (E1), OSB boards
- stone, ceramic, terrazzo, tiles
- cement floors
- cavity floors
Suitable subfloors
- STAUF VDP 130
- STAUF VPU 155 S + STAUF quartz sand
- STAUF D 54
- STAUF VDP 160
- STAUF VEP 195 + STAUF quartz sand
- STAUF WEP 180 + STAUF quartz sand
Suitable primers
- up to 1 mm suitable for castors swivel chairs according to DIN EN 12529
- suitable on subfloor heating systems
- good absorbency
- ductile during processing
- high strength
- pumpable
- self-levelling
- tension reducing
- with STAUF reinforcing fibres also suitable for use on surfaces that are not dimensionally stable
Product properties
- light grey
Color
- 1500g per mm layer thickness
Consumption in g/m² per mm layer thickness
- after 2 hours at 20 °C, max 65% rel. humidity
Accessibility/ready for foot traffic
- after 12 hours at 20 °C, (with 2 mm layer thickness) max 65% rel. humidity
- after 24 hours at 20 °C, (with 10 mm layer thickness) max 65% rel. humidity
- after 48 hours at 20 °C, (with 20 mm layer thickness) max 65% rel. humidity
- after 72 hours at 20 °C, (with 40 mm layer thickness) max 65% rel. humidity
Ready for installation
- On chipboards / OSB boards: Add STAUF reinforcing fibres to levelling compound
- Behaviour in fire, DIN 4102: A2 and DIN EN 13501: A2fl-S1
Additional instructions 1
- minimum 15 °C, maximum 75% rel. humidity, preferably max. 65%
Room climate at work site
- –
Transport hazard category
- dry
Storage requirements
- 9 months
Shelf-life
- ZP1
Giscode
- EC1 plus
Emicode
- 25 kg paper bag
Available packaging
- minimum 1 mm below floor coverings
- min. 2 mm below wood flooring
- 0,5 – 40 mm without aggregate
- 3 – 40 mm with reinforcing fibres
- 20 – 40 mm with aggregates
- mastic asphalt screed 2-5 mm
layer thickness
- approx. 30 minutes at 20 °C and 65% rel. humidity
Processing time
- 25 kg levelling compound
- Layer thickness 20 – 40 mm: 25 kg levelling compound and 6 – 18 kg quartz sand
- Fibre reinforcement: 25 kg filling compound and 250 g STAUF reinforcing fibres
Mixing ratio component A
- layer thickness up 20 mm: 6,5 liter water
- layer thickness at 20 mm: 6 liter water
Отзиви
Все още няма отзиви.