Саморазливна замазка STAUF XP 20

Cement-based levelling compound

  • suitable below wood flooring
  • suitable below textile and elastic floorings
  • excellent levelling

Описание

    Application range

  • suitable below elastic/textile floor coverings and wood flooring

    Suitable subfloors

  • sanded mastic asphalt screed
  • concrete C 25 / 30 according to DIN 1045 (non-skid surface)
  • calcium sulphate (flow) floors
  • wooden planks, wood fibre boards
  • magnesite and plaster floors
  • chipboards V100 (E1), OSB boards
  • stone, ceramic, terrazzo, tiles
  • cement floors
  • cavity floors

    Suitable primers

  • STAUF VDP 130
  • STAUF VPU 155 S + STAUF quartz sand
  • STAUF D 54
  • STAUF VDP 160
  • STAUF VEP 195 + STAUF quartz sand
  • STAUF WEP 180 + STAUF quartz sand

    Product properties

  • suitable on subfloor heating systems
  • good absorbency
  • pumpable
  • self-levelling
  • tension reducing
  • suitable for castors swivel chairs according to DIN EN 12529

    Color

  • light grey

    Consumption in g/m² per mm layer thickness

  • 1500g per mm layer thickness

    Accessibility/ready for foot traffic

  • after 2 hours at 20 °C, max 65% rel. humidity

    Ready for installation

  • 16 hours (for 2 mm layer thickness) at 20°C, relative humidity 65% max.
  • 24 hours at 20 °C, (with 5 mm layer thickness) max 65% rel. humidity
  • 48 hours at 20 °C, (with 5 – 10 mm layer thickness) max 65% rel. humidity
  • after 72 hours at 20 °C, (with 20 mm layer thickness) max 65% rel. Humidity

    Additional instructions 1

  • On chipboards / OSB boards: Add STAUF reinforcing fibres to levelling compound
  • Without flammable constituents as per DIN 4102: A1 and DIN EN 13501: A1fl

    Room climate at work site

  • minimum 15 °C, maximum 75% rel. humidity, preferably max. 65%

    Transport requirements

  • frost-free

    Storage requirements

  • dry

    Shelf-life

  • 9 months

    Giscode

  • ZP1

    Emicode

  • EC1 plus

    Available packaging

  • 25 kg paper bag

    layer thickness

  • 1 – 20 mm without aggregates
  • 11 – 20 mm with aggregates
  • min. 2 mm below wood flooring
  • At least 2 mm under flexible floor coverings
  • At least 1 mm under textile floor coverings
  • mastic asphalt screed 2-5 mm

    Processing time

  • approx. 30 minutes at 20 °C and 65% rel. humidity

    Mixing ratio component A

  • Layer thickness 1-20 mm: 25 kg filler
  • Layer thickness 11-20 mm: 25 kg levelling compound and 16 kg quartz sand
  • fibre reinforcement: 25 kg levelling compound and 250g STAUF reinforcing fibres

    Mixing ratio component B

  • layer thickness up to 5 mm: 6.5 liter water
  • layer thickness at 5 mm: 6,25 liter water

Отзиви

Все още няма отзиви.

Напишете първия отзив за „Саморазливна замазка STAUF XP 20“

Вашият имейл адрес няма да бъде публикуван. Задължителните полета са отбелязани с *