Замазка STAUF GS

Compensation compound on calcium sulfate- hemihydrate basis

  • leveling and compensation compound with good flow characteristics
  • surface low in pores
Код: 133210 Категория: Brand: STAUF

Описание

Application range

  • suitable below elastic/textile floor coverings and multiple layer wood flooring

Suitable subfloors

  • sanded mastic asphalt screed
  • concrete C 25 / 30 according to DIN 1045 (non-skid surface)
  • calcium sulphate (flow) floors
  • wooden planks, wood fibre boards
  • magnesite and plaster floors
  • unlaminated gypsum fibre boards
  • cement floors
  • cavity floors

Suitable primers

  • STAUF VDP 130
  • STAUF VPU 155 S + STAUF quartz sand
  • STAUF D 54
  • STAUF VDP 160
  • STAUF VEP 195 + STAUF quartz sand
  • STAUF WEP 180 + STAUF quartz sand

Product properties

  • up to 1 mm suitable for castors swivel chairs according to DIN EN 12529
  • suitable on subfloor heating systems
  • Suitable for multi-layer wood flooring installed with elastic adhesives
  • pumpable
  • self-levelling

Color

  • light grey

Consumption in g/m² per mm layer thickness

  • 1500g per mm layer thickness

Accessibility/ready for foot traffic

  • after 3 hours at 20 °C, max 65% rel. humidity

Ready for installation

  • 24 hours at 20 °C, (with 3 mm layer thickness) max 65% rel. humidity

Additional instructions 1

  • From 4 mm, layer thickness must be measured with a CM gauge. Nominal value less than or equal to 0.5 CM%.
  • Without flammable components in accordance with DIN 4102: A1 and DIN EN 13501: A1fl.
  • Under multi-layer wood flooring, at least 3 mm thick layer and if bonded with elastic or hard elastic STAUF wood flooring adhesives

Room climate at work site

  • minimum 15 °C, maximum 75% rel. humidity, preferably max. 65%

Transport requirements

  • dry

Storage requirements

  • dry

Shelf-life

  • 9 months

Giscode

  • CP1

Emicode

  • EC1 plus

Available packaging

  • 25 kg paper bag

layer thickness

  • 1 – 20 mm without aggregates
  • 10 – 30 mm with aggregates

Processing time

  • approx. 30 minutes at 20 °C and 65% rel. humidity

Mixing ratio component A

  • 25 kg levelling compound

Mixing ratio component B

  • 6 liter water

Отзиви

Все още няма отзиви.

Напишете първия отзив за „Замазка STAUF GS“

Вашият имейл адрес няма да бъде публикуван. Задължителните полета са отбелязани с *