Саморазливна замазка STAUF FZ

Cement-based thin screed for thick layer levelling applications

  • self-leveling
  • synthetic resin-based

Описание

    Application range

  • thick layer levelling of uneveness/large-area levelling
  • levelling of cement floors prior to floor covering- /wood flooring installation

    Suitable subfloors

  • sanded mastic asphalt screed
  • concrete C 25 / 30 according to DIN 1045 (non-skid surface)
  • calcium sulphate (flow) floors
  • cement floors
  • cavity floors

    Suitable primers

  • STAUF VDP 130
  • STAUF VPU 155 S + STAUF quartz sand
  • STAUF D 54
  • STAUF VDP 160
  • STAUF VEP 195 + STAUF quartz sand
  • STAUF WEP 180 + STAUF quartz sand

    Product properties

  • suitable on subfloor heating systems
  • good absorbency
  • pumpable
  • very low emission
  • tension reducing

    Color

  • light grey

    Consumption in g/m² per mm layer thickness

  • 1800g per mm layer thickness

    Accessibility/ready for foot traffic

  • after 4 hours at 20 °C, max 65% rel. humidity

    Ready for installation

  • 96 hours at 20 °C, (with 21 – 30 mm layer thickness) max 65% rel. humidity
  • 72 hours at 20 °C, (with 11 – 20 mm layer thickness) max 65% rel. humidity
  • 120 hours at 20 °C, (with 31 – 40 mm layer thickness) max 65% rel. humidity
  • 24 hours at 20 °C, (with 5 mm layer thickness) max 65% rel. humidity
  • 48 hours at 20 °C, (with 5 – 10 mm layer thickness) max 65% rel. humidity

    Additional instructions 1

  • starting with layer thicknesses of more than 10 mm, layers must be measured using CM device. Weighted sample 50 g, reading after 10 min., target value < 2.0 CM%
  • Without flammable components in accordance with DIN 4102: A1 and DIN EN 13501: A1fl.

    Room climate at work site

  • minimum 15 °C, maximum 75% rel. humidity, preferably max. 65%

    Transport requirements

  • dry

    Transport hazard category

    Storage requirements

  • dry

    Shelf-life

  • 9 months

    Giscode

  • ZP1

    Emicode

  • EC1 plus

    Available packaging

  • 25 kg paper bag

    layer thickness

  • 3 – 40 mm without aggregates
  • 10 – 60 mm with aggregates
  • below wood flooring from 5 mm
  • on mastic asphalt screed not more then 4 mm

    Processing time

  • approx. 30 minutes at 20 °C and 65% rel. humidity

    Mixing ratio component A

  • layer thickness 10 – 60 mm: 25 kg levelling compound and 16 kg quartz sand

    Mixing ratio component B

  • 4.5 liter water

Отзиви

Все още няма отзиви.

Напишете първия отзив за „Саморазливна замазка STAUF FZ“

Вашият имейл адрес няма да бъде публикуван. Задължителните полета са отбелязани с *